## Abstract

With this method, new data of plume development and collision processes in the beginning of the ablation process can be extracted. It also allows us to identify important processes by comparing the computational results with experimental ones, such as density, energy, and angular distributions.

Our main results deviate only slightly from an earlier study with constant surface temperature and evaporation rate at times t much greater than tau(laser), and this demonstrates that at these later times, the collisions in the plume efficiently smear out the characteristics of the varying temperature at the surface during ablation. The physical properties of the gas flow are determined by the mean thermal energy in the initial plume as well as the number of monolayers emitted.In the present work, we have studied ablation of a silver metal surface with a Nd:YAG laser (355 nm, 0.8 J/cm(2), 6 ns) on the basis of measured data. We have solved the nonlinear heat conduction equation for the laser heating of the system and calculated the varying surface temperature and evaporation rates. These realistic experimental input parameters are further combined with a direct simulation Monte Carlo (DSMC) description of collisions in the gas flow of ablated surface atoms.

With this method, new data of plume development and collision processes in the beginning of the ablation process can be extracted. It also allows us to identify important processes by comparing the computational results with experimental ones, such as density, energy, and angular distributions.

Our main results deviate only slightly from an earlier study with constant surface temperature and evaporation rate at times t much greater than tau(laser), and this demonstrates that at these later times, the collisions in the plume efficiently smear out the characteristics of the varying temperature at the surface during ablation. The physical properties of the gas flow are determined by the mean thermal energy in the initial plume as well as the number of monolayers emitted.

Original language | English |
---|---|

Journal | Applied Physics A |

Volume | 69 |

Pages (from-to) | S577 |

ISSN | 0947-8396 |

DOIs | |

Publication status | Published - 1999 |

## Keywords

- PULSED DESORPTION FLOWS; ABLATION; VACUUM; MONTE CARLO METHOD, Direct Simulation DSMC