High performance current controller for particle accelerator magnets supply

Ramkrishan Maheshwari; Benoit Bidoggia; Stig Munk-Nielsen; Frede Blaabjerg

doi:10.1109/IECON.2013.6700308

High performance current controller for particle accelerator magnets supply

Ramkrishan Maheshwari, Benoit Bidoggia, Stig Munk-Nielsen, Frede Blaabjerg

Aalborg Universitet

Publikation: Kapitel i bog/rapport/konference-proceeding › Konferencebidrag i proceedings › Forskning › peer review

Abstrakt

The electromagnets in modern particle accelerators require high performance power supply whose output is required to track the current reference with a very high accuracy (down to 50 ppm). This demands very high bandwidth controller design. A converter based on buck converter topology is used in this paper. The paper presents a model of the converter which enables the design of high performance controller using a proportional-integral controller and a feedforward gain. Experimental and simulation results are presented with resistive and inductive load which verify the system requirement using the proposed approach of the system model and controller design.

Originalsprog	Engelsk
Titel	Proceedings, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society
Antal sider	6
Publikationsdato	1. dec. 2013
Sider	7082-7087
Artikelnummer	6700308
ISBN (Trykt)	9781479902248
DOI	https://doi.org/10.1109/IECON.2013.6700308
Status	Udgivet - 1. dec. 2013
Begivenhed	39th Annual Conference of the IEEE Industrial Electronics Society, IECON 2013 - Vienna, Østrig Varighed: 10. nov. 2013 → 14. nov. 2013

Konference

Konference	39th Annual Conference of the IEEE Industrial Electronics Society, IECON 2013
Land/Område	Østrig
By	Vienna
Periode	10/11/2013 → 14/11/2013
Sponsor	The Institute of Electrical and Electronics Engineers (IEEE), IEEE Industrial Electronics Society, AIT Austrian Institute of Technology, Vienna University of Technology

Dokumenter og links

10.1109/IECON.2013.6700308

Andre filer og links

Link to publication in Scopus

Citationsformater

@inproceedings{6178287b25b14ef5a6fd5ce4696caa7c,

title = "High performance current controller for particle accelerator magnets supply",

abstract = "The electromagnets in modern particle accelerators require high performance power supply whose output is required to track the current reference with a very high accuracy (down to 50 ppm). This demands very high bandwidth controller design. A converter based on buck converter topology is used in this paper. The paper presents a model of the converter which enables the design of high performance controller using a proportional-integral controller and a feedforward gain. Experimental and simulation results are presented with resistive and inductive load which verify the system requirement using the proposed approach of the system model and controller design.",

author = "Ramkrishan Maheshwari and Benoit Bidoggia and Stig Munk-Nielsen and Frede Blaabjerg",

year = "2013",

month = dec,

day = "1",

doi = "10.1109/IECON.2013.6700308",

language = "English",

isbn = "9781479902248",

pages = "7082--7087",

booktitle = "Proceedings, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society",

note = "39th Annual Conference of the IEEE Industrial Electronics Society, IECON 2013 ; Conference date: 10-11-2013 Through 14-11-2013",

}

Maheshwari, R, Bidoggia, B, Munk-Nielsen, S & Blaabjerg, F 2013, High performance current controller for particle accelerator magnets supply. i Proceedings, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society., 6700308, s. 7082-7087, 39th Annual Conference of the IEEE Industrial Electronics Society, IECON 2013, Vienna, Østrig, 10/11/2013. https://doi.org/10.1109/IECON.2013.6700308

High performance current controller for particle accelerator magnets supply. / Maheshwari, Ramkrishan; Bidoggia, Benoit; Munk-Nielsen, Stig et al.

Proceedings, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society. 2013. s. 7082-7087 6700308.

Publikation: Kapitel i bog/rapport/konference-proceeding › Konferencebidrag i proceedings › Forskning › peer review

TY - GEN

T1 - High performance current controller for particle accelerator magnets supply

AU - Maheshwari, Ramkrishan

AU - Bidoggia, Benoit

AU - Munk-Nielsen, Stig

AU - Blaabjerg, Frede

PY - 2013/12/1

Y1 - 2013/12/1

N2 - The electromagnets in modern particle accelerators require high performance power supply whose output is required to track the current reference with a very high accuracy (down to 50 ppm). This demands very high bandwidth controller design. A converter based on buck converter topology is used in this paper. The paper presents a model of the converter which enables the design of high performance controller using a proportional-integral controller and a feedforward gain. Experimental and simulation results are presented with resistive and inductive load which verify the system requirement using the proposed approach of the system model and controller design.

AB - The electromagnets in modern particle accelerators require high performance power supply whose output is required to track the current reference with a very high accuracy (down to 50 ppm). This demands very high bandwidth controller design. A converter based on buck converter topology is used in this paper. The paper presents a model of the converter which enables the design of high performance controller using a proportional-integral controller and a feedforward gain. Experimental and simulation results are presented with resistive and inductive load which verify the system requirement using the proposed approach of the system model and controller design.

UR - http://www.scopus.com/inward/record.url?scp=84893625991&partnerID=8YFLogxK

U2 - 10.1109/IECON.2013.6700308

DO - 10.1109/IECON.2013.6700308

M3 - Article in proceedings

AN - SCOPUS:84893625991

SN - 9781479902248

SP - 7082

EP - 7087

BT - Proceedings, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society

T2 - 39th Annual Conference of the IEEE Industrial Electronics Society, IECON 2013

Y2 - 10 November 2013 through 14 November 2013

ER -

High performance current controller for particle accelerator magnets supply

Abstrakt

Konference

Dokumenter og links

Andre filer og links

Fingeraftryk

Citationsformater