Configuration and validation of dynamic simulation for design of vibratory bowl feeders

Publikation: Bidrag til bog/antologi/rapport/konference-proceedingKonferencebidrag i proceedingsForskningpeer review

Resumé

Vibratory bowl feeders (VBF) are widely used in industry, but their design process is time consuming. This paper outlines an approach for the automatic design of such feeders, and utilizes rigid body simulation for evaluating design configurations. To ensure the applicability of the simulation, the paper makes an extensive evaluation in simulation and compares it to real world experiments. The experiments show similar overall characteristics, but also reveal differences which need to be considered when using simulation as a tool for design. Finally the paper illustrates the design process by optimizing the parameters of two devices used for the orienting of parts (often referred to as traps), and tests their configurations in the real world.

OriginalsprogEngelsk
TitelProceeding of the 12th IEEE International Conference on Control and Automation
ForlagIEEE
Publikationsdato2016
Sider485-492
ISBN (Elektronisk)9781509017386
DOI
StatusUdgivet - 2016
Begivenhed12th IEEE International Conference on Control and Automation - Kathmandu, Nepal
Varighed: 1. jun. 20163. jun. 2016

Konference

Konference12th IEEE International Conference on Control and Automation
LandNepal
ByKathmandu
Periode01/06/201603/06/2016

Fingeraftryk

Computer simulation
Experiments
Industry

Citer dette

Mathiesen, S., & Ellekilde, L. P. (2016). Configuration and validation of dynamic simulation for design of vibratory bowl feeders. I Proceeding of the 12th IEEE International Conference on Control and Automation (s. 485-492). IEEE. https://doi.org/10.1109/ICCA.2016.7505324
Mathiesen, Simon ; Ellekilde, Lars Peter. / Configuration and validation of dynamic simulation for design of vibratory bowl feeders. Proceeding of the 12th IEEE International Conference on Control and Automation. IEEE, 2016. s. 485-492
@inproceedings{d4bc9039036f4d4f9edd08a20db75a9d,
title = "Configuration and validation of dynamic simulation for design of vibratory bowl feeders",
abstract = "Vibratory bowl feeders (VBF) are widely used in industry, but their design process is time consuming. This paper outlines an approach for the automatic design of such feeders, and utilizes rigid body simulation for evaluating design configurations. To ensure the applicability of the simulation, the paper makes an extensive evaluation in simulation and compares it to real world experiments. The experiments show similar overall characteristics, but also reveal differences which need to be considered when using simulation as a tool for design. Finally the paper illustrates the design process by optimizing the parameters of two devices used for the orienting of parts (often referred to as traps), and tests their configurations in the real world.",
author = "Simon Mathiesen and Ellekilde, {Lars Peter}",
year = "2016",
doi = "10.1109/ICCA.2016.7505324",
language = "English",
pages = "485--492",
booktitle = "Proceeding of the 12th IEEE International Conference on Control and Automation",
publisher = "IEEE",
address = "United States",

}

Mathiesen, S & Ellekilde, LP 2016, Configuration and validation of dynamic simulation for design of vibratory bowl feeders. i Proceeding of the 12th IEEE International Conference on Control and Automation. IEEE, s. 485-492, 12th IEEE International Conference on Control and Automation, Kathmandu, Nepal, 01/06/2016. https://doi.org/10.1109/ICCA.2016.7505324

Configuration and validation of dynamic simulation for design of vibratory bowl feeders. / Mathiesen, Simon; Ellekilde, Lars Peter.

Proceeding of the 12th IEEE International Conference on Control and Automation. IEEE, 2016. s. 485-492.

Publikation: Bidrag til bog/antologi/rapport/konference-proceedingKonferencebidrag i proceedingsForskningpeer review

TY - GEN

T1 - Configuration and validation of dynamic simulation for design of vibratory bowl feeders

AU - Mathiesen, Simon

AU - Ellekilde, Lars Peter

PY - 2016

Y1 - 2016

N2 - Vibratory bowl feeders (VBF) are widely used in industry, but their design process is time consuming. This paper outlines an approach for the automatic design of such feeders, and utilizes rigid body simulation for evaluating design configurations. To ensure the applicability of the simulation, the paper makes an extensive evaluation in simulation and compares it to real world experiments. The experiments show similar overall characteristics, but also reveal differences which need to be considered when using simulation as a tool for design. Finally the paper illustrates the design process by optimizing the parameters of two devices used for the orienting of parts (often referred to as traps), and tests their configurations in the real world.

AB - Vibratory bowl feeders (VBF) are widely used in industry, but their design process is time consuming. This paper outlines an approach for the automatic design of such feeders, and utilizes rigid body simulation for evaluating design configurations. To ensure the applicability of the simulation, the paper makes an extensive evaluation in simulation and compares it to real world experiments. The experiments show similar overall characteristics, but also reveal differences which need to be considered when using simulation as a tool for design. Finally the paper illustrates the design process by optimizing the parameters of two devices used for the orienting of parts (often referred to as traps), and tests their configurations in the real world.

U2 - 10.1109/ICCA.2016.7505324

DO - 10.1109/ICCA.2016.7505324

M3 - Article in proceedings

SP - 485

EP - 492

BT - Proceeding of the 12th IEEE International Conference on Control and Automation

PB - IEEE

ER -

Mathiesen S, Ellekilde LP. Configuration and validation of dynamic simulation for design of vibratory bowl feeders. I Proceeding of the 12th IEEE International Conference on Control and Automation. IEEE. 2016. s. 485-492 https://doi.org/10.1109/ICCA.2016.7505324