Compliant Detachment of Wall-Climbing Robot Unaffected by Adhesion State

Bingcheng Wang, Xiaofeng Xiong, Jinjun Duan, Zhouyi Wang, Zhendong Dai*

*Kontaktforfatter

Publikation: Bidrag til tidsskriftTidsskriftartikelForskningpeer review

15 Downloads (Pure)

Abstrakt

Adhesion state is a key factor affecting the motion stability of a wall-climbing robot. According to different adhesion states, there is no universal method for compliant detachment. We propose an online impedance strategy for controlling peeling angle to realize compliant movement. Variable compliant motions are achieved by online tuning the stiffness and damping parameters of proportional-derivative control, which realizes compliant detachment with a peeling angle of π, the adhesion strength to adjust to a minimum and basically eliminated the instant change in normal adhesion strength at the detachment end state. The proposed controller was validated using a vertical climbing robot. The results showed that, with the proposed controller, the sudden change in the normal adhesion force during peeling was significantly reduced. Besides, there is no correlation between the sudden change in the normal adhesion force at the detachment end state and the adhesion state. Regardless of the adhesion states, the compliant detachment can be accomplished reliably
OriginalsprogEngelsk
Artikelnummer5860
TidsskriftApplied Sciences
Vol/bind11
Udgave nummer13
Antal sider16
DOI
StatusUdgivet - 24. jun. 2021

Bibliografisk note

Peer review; Applied Sciences (https://www.mdpi.com/journal/applsci); Journal publication

Fingeraftryk

Dyk ned i forskningsemnerne om 'Compliant Detachment of Wall-Climbing Robot Unaffected by Adhesion State'. Sammen danner de et unikt fingeraftryk.

Citationsformater