Calibrating a wind turbine model using diverse datasets

Jennifer M. Rinker, Morten H. Hansen, Torben J. Larsen

Publikation: Bidrag til tidsskriftKonferenceartikelForskningpeer review

62 Downloads (Pure)

Resumé

This paper presents a model calibration investigation using a wide range of available data. The wind turbine under investigation was the V52 research turbine located at Denmark Technical University (DTU) Ris campus. The data included drawings and static and dynamic tests for both the entire wind turbine and the isolated blades. Each set of data was used to calibrate some aspect of the final model. There are three main parts of this paper. First, the different data sources are outlined, including an overview of the experimental procedures and the key results. Second, the model calibration procedure for each set of experimental data is explained. Third, recommendations for the calibration procedure are presented for future researchers and the key outcomes of our calibration investigation are discussed.

OriginalsprogEngelsk
Artikelnummer062026
BogserieJournal of Physics: Conference Series
Vol/bind1037
Antal sider10
ISSN1742-6588
DOI
StatusUdgivet - 19. jun. 2018
Begivenhed7th Science of Making Torque from Wind, TORQUE 2018 - Milan, Italien
Varighed: 20. jun. 201822. jun. 2018

Konference

Konference7th Science of Making Torque from Wind, TORQUE 2018
LandItalien
ByMilan
Periode20/06/201822/06/2018

Fingeraftryk

wind turbines
calibrating
static tests
dynamic tests
Denmark
turbines
blades
recommendations

Citer dette

Rinker, Jennifer M. ; Hansen, Morten H. ; Larsen, Torben J. / Calibrating a wind turbine model using diverse datasets. I: Journal of Physics: Conference Series. 2018 ; Bind 1037.
@inproceedings{615bacf2bdb64c50bb3e019e17e8c81d,
title = "Calibrating a wind turbine model using diverse datasets",
abstract = "This paper presents a model calibration investigation using a wide range of available data. The wind turbine under investigation was the V52 research turbine located at Denmark Technical University (DTU) Ris campus. The data included drawings and static and dynamic tests for both the entire wind turbine and the isolated blades. Each set of data was used to calibrate some aspect of the final model. There are three main parts of this paper. First, the different data sources are outlined, including an overview of the experimental procedures and the key results. Second, the model calibration procedure for each set of experimental data is explained. Third, recommendations for the calibration procedure are presented for future researchers and the key outcomes of our calibration investigation are discussed.",
author = "Rinker, {Jennifer M.} and Hansen, {Morten H.} and Larsen, {Torben J.}",
year = "2018",
month = "6",
day = "19",
doi = "10.1088/1742-6596/1037/6/062026",
language = "English",
volume = "1037",
journal = "Journal of Physics: Conference Series (Online)",
issn = "1742-6596",
publisher = "IOP Publishing",

}

Calibrating a wind turbine model using diverse datasets. / Rinker, Jennifer M.; Hansen, Morten H.; Larsen, Torben J.

I: Journal of Physics: Conference Series, Bind 1037, 062026, 19.06.2018.

Publikation: Bidrag til tidsskriftKonferenceartikelForskningpeer review

TY - GEN

T1 - Calibrating a wind turbine model using diverse datasets

AU - Rinker, Jennifer M.

AU - Hansen, Morten H.

AU - Larsen, Torben J.

PY - 2018/6/19

Y1 - 2018/6/19

N2 - This paper presents a model calibration investigation using a wide range of available data. The wind turbine under investigation was the V52 research turbine located at Denmark Technical University (DTU) Ris campus. The data included drawings and static and dynamic tests for both the entire wind turbine and the isolated blades. Each set of data was used to calibrate some aspect of the final model. There are three main parts of this paper. First, the different data sources are outlined, including an overview of the experimental procedures and the key results. Second, the model calibration procedure for each set of experimental data is explained. Third, recommendations for the calibration procedure are presented for future researchers and the key outcomes of our calibration investigation are discussed.

AB - This paper presents a model calibration investigation using a wide range of available data. The wind turbine under investigation was the V52 research turbine located at Denmark Technical University (DTU) Ris campus. The data included drawings and static and dynamic tests for both the entire wind turbine and the isolated blades. Each set of data was used to calibrate some aspect of the final model. There are three main parts of this paper. First, the different data sources are outlined, including an overview of the experimental procedures and the key results. Second, the model calibration procedure for each set of experimental data is explained. Third, recommendations for the calibration procedure are presented for future researchers and the key outcomes of our calibration investigation are discussed.

U2 - 10.1088/1742-6596/1037/6/062026

DO - 10.1088/1742-6596/1037/6/062026

M3 - Conference article

VL - 1037

JO - Journal of Physics: Conference Series (Online)

JF - Journal of Physics: Conference Series (Online)

SN - 1742-6596

M1 - 062026

ER -