• Campusvej 55

    5230 Odense M

    Danmark

20092019
Hvis du har foretaget ændringer i Pure, vil de snart blive vist her.

Publikationer 2009 2019

2019

DAMPED UPDATED FINITE ELEMENT MODELS FOR DYNAMIC DESIGN

Arora, V., sep. 2019, Proceeding of 14th International Conference on Vibration Problems . Springer

Publikation: Bidrag til bog/antologi/rapport/konference-proceedingKonferencebidrag i proceedingsForskningpeer review

50 Downloads (Pure)

Determination of optimal coupling stiffness using modal updating techniques for Stiffened Plates

Shrivastava, K., Vijayan, K. & Arora, V., 2019, I : Procedia Structural Integrity. 14, s. 556-563

Publikation: Bidrag til tidsskriftKonferenceartikelForskningpeer review

Åben adgang
Fil
Stiffness
Natural frequencies
Structural members
Structural integrity
Modal analysis

Use of 3D Scan of Weld Joint in Finite Element Analysis and Stochastic Analysis of Hot‑spot Stresses in Tubular Joint for Fatigue Life Estimation

Larsen, M. L., Arora, V., Lützen, M., PEDERSEN, RONNIE. R. & Putnam, E., jun. 2019.

Publikation: Konferencebidrag uden forlag/tidsskriftPaperForskningpeer review

Validation and model updating of weld in finite element model of K-node structure using experimental data for fatigue analysis

Larsen, M. L., Arora, V., Lützen, M., Pedersen, R. R. & Putnam, E., 15. apr. 2019, Trends in the Analysis and Design of Marine Structures. Parunov, J. & Soares, C. G. (red.). London: CRC Press, s. 310-316 (Proceedings in Marine Technology and Ocean Engineering, Bind 2).

Publikation: Bidrag til bog/antologi/rapport/konference-proceedingKonferencebidrag i proceedingsForskningpeer review

Welds
Fatigue of materials
Geometry
Finite element method
2018

Damped updated finite element model for damage detection

Arora, V. & Vijayan, K., jul. 2018, 25th International Congress on Sound and Vibration 2018 (ICSV 25) : Hiroshima Calling. International Institute of Acoustics and Vibration, Bind 1. s. 4725-4732

Publikation: Bidrag til bog/antologi/rapport/konference-proceedingKonferencebidrag i proceedingsForskningpeer review

Damage detection
Damping
Stiffness
Structural health monitoring
Natural frequencies

Determination of optimal coupling stiffness using modal updating techniques for a Stiffened Plates

Arora, V., Shrivastava, K. & Vijayan, K., jul. 2018.

Publikation: Konferencebidrag uden forlag/tidsskriftPaperForskningpeer review

86 Downloads (Pure)

Use of damping identification technique for damage detection

Arora, V., 2. feb. 2018, Conference book of the 2017 International Conference on Engineering Vibration: Vibration-Based Structural Health Monitoring Data Analysis and Time Series Methods. Manoach, E., Stoykov, S. & Wiercigroch, M. (red.). EDP Sciences, 5 s. 14004. (MATEC Web of Conferences; Nr. 148).

Publikation: Bidrag til bog/antologi/rapport/konference-proceedingKonferencebidrag i proceedingsForskningpeer review

Åben adgang
Fil
Damage detection
Damping
Stiffness
Structural health monitoring
Natural frequencies
2017

FRF-BASED PROBABILISTIC MODEL UPDATING IN STRUCTURAL DYNAMICS FOR UNCERTAINTY IDENTIFICATION AND QUANTIFICATION

Arora, V., Adhikari, S. & Friswell, M. I., 2017. 6 s.

Publikation: Konferencebidrag uden forlag/tidsskriftPaperForskningpeer review

Identification of viscous and structural damping in the dynamic system

Arora, V., 2017, I : International Journal of Structural Engineering. 8, 4, s. 345-360

Publikation: Bidrag til tidsskriftTidsskriftartikelForskningpeer review

Natural frequencies-based stochastic finite element model updating using equal weighting factors

Calvo Álvarez, A. & Arora, V., 2017, I : International Journal of Structural Engineering. 8, 3, s. 227-288

Publikation: Bidrag til tidsskriftTidsskriftartikelForskningpeer review

Uncertainty in the modal parameters of the structural elements within a stiffened structure

Halder, S., Shrivastava, K., Vijayan, K. & Arora, V., dec. 2017, Proceedings of the 5th International Conference on Ships and Offshore Structures.

Publikation: Bidrag til bog/antologi/rapport/konference-proceedingKonferencebidrag i proceedingsForskningpeer review

Updating finite element model of façade scaffolds anchor considering experimental data

Dolejs, J., Arora, V. & Ilcik, J., 2017, Proceedings of the METNET Seminar 2017 in Cottbus. Virdi, K. & Tenhunen, L. (red.). Häme University of Applied Sciences (HAMK), s. 9-24

Publikation: Bidrag til bog/antologi/rapport/konference-proceedingKonferencebidrag i proceedingsForskningpeer review

Åben adgang
165 Downloads (Pure)

Validation and Model Updating of Weld In Finite Element Model of K-Node Structure Using Experimental Data for Fatigue Analysis

Larsen, M. L., Arora, V., Lützen, M. & Pedersen, R. R., okt. 2017, Proceedings of NSCM 30: The 30th Nordic Seminar on Computational Mechanics 25-27 October 2017. Høgsberg, J. & Pedersen, N. L. (red.). DTU, s. 109-112

Publikation: Bidrag til bog/antologi/rapport/konference-proceedingKonferencebidrag i proceedingsForskningpeer review

Åben adgang
Fil
2016

A Blind Source Separation Based Approach for Modal Parameter Estimation in Traditional Input-Output Experimental Modal Analysis Framework

Arora, V. & Chauhan, S., maj 2016, Topics in Modal Analysis & Testing: Proceedings of the 34th IMAC. Mains, M. (red.). Springer, s. 261-272 (Society for Experimental Mechanics. Annual Proceedings, Bind 10).

Publikation: Bidrag til bog/antologi/rapport/konference-proceedingKonferencebidrag i proceedingsForskningpeer review

Comparative study of finite element reduction techniques for damping identification in dynamic system

Arora, V., 2016, Proceedings of the 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustic, 2016. Vogiatzis, K., Kouroussis, G., Crocker, M. & Pawelczyk, M. (red.). International Institute of Acoustics and Vibration

Publikation: Bidrag til bog/antologi/rapport/konference-proceedingKonferencebidrag i proceedingsForskningpeer review

Åben adgang

Design of new scaffold anchor based on the updated finite element model

Ilcik, J., Arora, V. & Dolejs, J., 2016, I : Engineering Structures. 118, s. 334-343

Publikation: Bidrag til tidsskriftTidsskriftartikelForskningpeer review

2015

Direct structural damping identification method using complex FRFs

Arora, V., 2015, I : Journal of Sound and Vibration. 339, s. 304-323

Publikation: Bidrag til tidsskriftTidsskriftartikelForskningpeer review

FRF-based finite element model updating method for non-viscous and non-proportional damped system

Arora, V., Adhikari, S. & Friswell, M. I., jun. 2015.

Publikation: Konferencebidrag uden forlag/tidsskriftPaperForskningpeer review

Hybrid viscous-structural damping identification method

Arora, V., 2015, Vibration Engineering and Technology of Machinery: Proceedings of VETOMAC X 2014, held at the University of Manchester, UK, September 9-11, 2014. Springer, s. 209-218 (Mechanisms and Machine Science, Bind 23).

Publikation: Bidrag til bog/antologi/rapport/konference-proceedingBidrag til bog/antologiForskningpeer review

59 Downloads (Pure)

Validation of finite element updated models of the developed façade scaffold anchor

Ilcik, J., Arora, V. & Dolejs, J., 1. okt. 2015, I : IOP Conference Series: Materials Science and Engineering. 96, 10 s., 012049.

Publikation: Bidrag til tidsskriftKonferenceartikelForskningpeer review

Åben adgang
Fil
2014

Acoustic-based damage detection method

Arora, V., Wijnant, Y. H. & Boer, A. D., 2014, I : Applied Acoustics. 80, s. 23-27

Publikation: Bidrag til tidsskriftTidsskriftartikelForskningpeer review

Constrained antiresonance frequencies based model updating method for better matching of FRFs

Arora, V., 2014, I : Inverse Problems in Science and Engineering. 22, 6, s. 873-888

Publikation: Bidrag til tidsskriftTidsskriftartikelForskningpeer review

Direct structural damping identification method

Arora, V., 2014, Dynamics of Civil Structures: Proceedings of the 32nd IMAC, A Conference and Exposition on Structural Dynamics, 2014. Necati Catbas, F. (red.). Springer Publishing Company, s. 341-349 (Conference Proceedings of the Society for Experimental Mechanics Series).

Publikation: Bidrag til bog/antologi/rapport/konference-proceedingKonferencebidrag i proceedingsForskningpeer review

FE model updating method incorporating damping matrices for structural dynamic modifications

Arora, V., 2014, I : Structural Engineering and Mechanics. 52, 2, s. 261-274

Publikation: Bidrag til tidsskriftTidsskriftartikelForskningpeer review

Structural damping identification method using normal FRFs

Arora, V., 2014, I : International Journal of Solids and Structures. 51, 1, s. 133-143

Publikation: Bidrag til tidsskriftTidsskriftartikelForskningpeer review

Use of resonance and antiresonance frequencies for better matching of frequency response function

Arora, V., 2014, I : International Journal of Structural Engineering. 5, 1, s. 13-23

Publikation: Bidrag til tidsskriftTidsskriftartikelForskningpeer review

2013

Structural damping identification using finite element model updating

Arora, V., 2013. 8 s.

Publikation: Konferencebidrag uden forlag/tidsskriftPaperForskningpeer review

Structural dynamic modifications using damped finite element model updating

Arora, V., 2013. 7 s.

Publikation: Konferencebidrag uden forlag/tidsskriftPaperForskningpeer review

2011

Comparative Study of Finite Element Model Updating Methods

Arora, V., 2011, I : Journal of Vibration and Control. s. 2023-2039

Publikation: Bidrag til tidsskriftTidsskriftartikelForskningpeer review

Identification of stiffness and damping properties of axial air-foil bearings

Arora, V., Hoogt, P. J. M. V. D., Aarts, R. G. K. M. & Boer, A. D., 2011, I : International Journal of Mechanics and Materials in Design. s. 231-243

Publikation: Bidrag til tidsskriftTidsskriftartikelForskningpeer review

2010

Further experience with model updating incorporating damping matrices

Arora, V., Singh, S. P. & Kundra, T. K., 2010, I : Mechanical Systems and Signal Processing. 24, s. 1383-1390

Publikation: Bidrag til tidsskriftTidsskriftartikelForskningpeer review

Identification of dynamic properties of radial air-foil bearings

Arora, V., Hoogt, P. J. M. V. D. & Aarts, R. G. K. M., 2010, I : International Journal of Mechanics and Materials in Design. 6, s. 305-318

Publikation: Bidrag til tidsskriftTidsskriftartikelForskningpeer review

2009

Comparative study of damped FE model updating methods

Arora, V., Singh, S. P. & Kundra, T. K., 2009, I : Mechanical Systems and Signal Processing. 23, s. 2113-2129

Publikation: Bidrag til tidsskriftTidsskriftartikelForskningpeer review

Damped FE model updating using complex updating parameters: its use for dynamic design

Arora, V., Singh, S. P. & Kundra, T. K., 2009, I : Journal of Sound and Vibration. 324, s. 350-364

Publikation: Bidrag til tidsskriftTidsskriftartikelForskningpeer review

Damped model updating using complex updating parameters

Arora, V., Singh, S. P. & Kundra, T. K., 2009, I : Journal of Sound and Vibration. 320, s. 438-451

Publikation: Bidrag til tidsskriftTidsskriftartikelForskningpeer review

Finite element model updating with damping identification

Arora, V., Singh, S. P. & Kundra, T. K., 2009, I : Journal of Sound and Vibration. 324, s. 1111-1123

Publikation: Bidrag til tidsskriftTidsskriftartikelForskningpeer review

On the use of damped updated FE model for dynamic design

Arora, V., Singh, S. P. & Kundra, T. K., 2009, I : Mechanical Systems and Signal Processing. 23, s. 580-587

Publikation: Bidrag til tidsskriftTidsskriftartikelForskningpeer review