Numerical design and testing of a sound source for secondary calibration of microphones using the Boundary Element Method

Vicente Cutanda Henriquez (Foredragsholder)

Aktivitet: Foredrag og mundtlige bidragForedrag og præsentationer i privat eller offentlig virksomhed

Beskrivelse

Secondary calibration of microphones in free field is performed by placing the microphone under calibration in an anechoic chamber with a sound source, and exposing it to a controlled sound field. A calibrated microphone is also measured as a reference. While the two measurements are usually made consecutively, a variation of this procedure, where the microphones are measured simultaneously, is considered more advantageous from the metrological point of view. However, it must be guaranteed that the two microphones receive the same excitation from the source, although their positions are some distance apart to avoid acoustic interaction. As a part of the project Euromet-792, aiming to investigate and improve methods for secondary free-field calibration of microphones, a sound source suitable for simultaneous secondary free-field calibration has been designed using the Boundary Element Method. The source has a central plug with the eect of reducing the spatial variations of the sound pressure at the microphone positions within the frequency range of the calibration. After some preliminary measurements, the source has been tested thoroughly in a calibration setup at the acoustic laboratory of the Danish Fundamental Metrology Institute (DFM). The design and verification of the source are presented in this communication.

Emneord: Metrology, microphone, Calibration, source
Periode25. mar. 2009
BegivenhedstitelNAG/DAGA 2009: null
BegivenhedstypeKonference
PlaceringRotterdam, Holland